Kurzweil
KS-40A KURZWEIL STUDIO SPEAKESRS
5,000 EGP
SPECS |
All specifications subject to change without notice.
| Cabinet: | 100% wood cabinet using 12mm non-resonant MDF |
| HF Driver: | 3/4 inch (19mm) dome type, magnetically shielded |
| LF Driver: | 4 inch (106mm) diameter, magnetically shielded |
| Bass Reflex Port: | rear panel |
| Power Output: | 10Wrms x2 (at 1KHz, 10% THD) |
| Frequency Response: | 100-10,000Hz (at -5dB) |
| Controls: | 1x Volume, 1x Sub Bass |
| Input Ports: | 2 pairs of stereo RCA jacks, internally mixed
(Line A inputs feature treble boost of 9dB at 10KHz; Line B inputs are flat) |
| Input Impedance: | 20K Ohms |
| Height: | (9-1/16″) (23.00 cm) |
| Width: | (5-7/8″) (14.80 cm) |
| Depth: | (7-1/16″) (18.00 cm) |
| Weight: | (11.00 lb.) (5 kg), both cabinets |
KS-50A KURZWEIL
15,700 EGP
SPECS |
All specifications subject to change without notice.
| System Type: | Active 2-way |
| HF Driver: | 1” silk dome tweeter |
| LF Driver: | 5” kevlar curved cone (magnetically shielded) |
| Bass Reflex Port: | rear panel |
| Output Power: | 60W (HF 30W, LF 30W), 85W AC consumption power |
| Frequency Response: | 50 Hz – 20kHz |
| Input Impedance: | 23.3 kOhm balanced, 13.3 kOhm unbalanced |
| Crossover Point: | 2.5kHz |
| SPL: | 88dB+/- 3dB |
| Rated Noise Power: | 30 Watt (THD=1%, 4ohm@1kHz) |
| Input Sensitivity: | 75mV@1watt, 415mV@30Watt |
| Input Connectors: | XLR / TS 1/4” combo connector, balanced / unbalanced input |
| Volume Control: | rear panel |
| Indicator: | blue power LED on front panel |
| Dimensions: | 9.8″ (H) x 6.9″ (W) 7.9″ (D)
250mm (H)x 176mm(W) x 200mm (D) |
| Weight: | 9.9 lb / 4.5kg |
| Working Voltage: | AC100-240V 50/60HZ, with 115V / 230V AC selection switch |
Kurzweil Audio Interface Unite-2
6,000 EGP
OVERVIEW |
Two Input, Two Output USB 2.0 Audio Interface.
Get In
Two combo microphone/line inputs (with +48V phantom power support) and 1 switchable Hi-Z instrument input.
Get Out
Individual L/R outputs via balanced 1/4″ TRS connectors. Front panel headphone output with stereo 1/4″ connector.
Make the Conversion
24-bit / 96kHz AD/DA converters.
USB
Bus-powered, full speed USB 2.0. No external power connection required.
Controls
Intuitive and convenient front panel controls for channel input gain (with peak indicators), monitor, phantom power on/off, headphone and master volume.
Compatibility
Cross-platform compatibility for Windows (7, 8.1, 10 with ASIO 2.0, MMe, WDM and DirectSound), Mac OSX* (10.7 and above via the native CoreAudio USB Audio driver)
(*no driver install required)
Bitwig Studio-8 Included!
Bitwig Studio 8-Track is the sketch pad for your musical ideas.
All specifications subject to change without notice.
Kurzweil HDP1 studio Headphones
3,700 EGP
SPECS |
| Transducer: | 50mm Dynamic, Closed cavity |
| Ear Coupling: | Supra-aural |
| Frequency Response: | 10-30,000 Hz |
| Impedance: | 32Ω |
| Sensitivity: | 98dB (+/-3dB @1mW) |
| Rated Power: | 300mW |
| Max Power: | 1800 mW |
| Plug Type: | 3.5mm with 6.3mm (1/4″) adaptor included |
| Cable Type: | Straight and coiled options |
All specifications subject to change without notice.