Shop

Showing 1237–1248 of 1434 results

TURBOSOUND NUQ102 Portable Loudspeaker

0.00 EGP

Architecture & Engineering Specifications

The speaker shall be of the full range, two-way switchable bi-amp/passive type consisting of one 10″ (261 mm) LF driver and one 1″ (25 mm) HF compression driver. Performance specifications of a typical production unit shall meet or exceed the following: frequency response, measured with swept sine wave input, shall be flat within �3 dB from 55 Hz to 18 kHz and within -10 dB from 50 Hz to 20 kHz. Nominal dispersion, at -6 dB points, shall average 100� H x 60� V, rotatable. Nominal impedance shall be HF: 6 Ohms, LF: 8 Ohms; passive: 8 Ohms. Power handling shall be HF: 30 Watts continuous, 120 Watts peak, LF: 300 Watts continuous, 1,200 Watts peak; passive: 300 Watts continuous, 1,200 Watts peak. Sensitivity, measured on axis, mean averaged over stated bandwidth, shall be 93 dB, 1 Watt @ 1 metre. Maximum SPL (peak), measured at 1 metre with music program at stated amplifier input, shall be HF: 125 dB, LF: 124 dB; passive: 124 dB. Dimensions: 525 mm high x 318 mm wide x 258 mm deep (20.7″ x 12.5″ x 10.2″). Net weight: 12.7 kg (27.9 lbs). The loudspeaker system shall be the Turbosound NuQ102. No other loudspeaker shall be acceptable unless submitted data from an independent test laboratory verifies that the above combined performance / size specifications are equaled or exceeded.

Turbosound TCS62 Loudspeaker

0.00 EGP

Arrayable 2 Way 6.5″ Full Range Loudspeaker for Installation Applications

U1J PE.YAMAHA UPRIGHT PIANO WITH BENCH

350,000.00 EGP

The U1J was designed based on Yamaha’s acclaimed U series upright acoustic piano line. Complementing the U series’ excellent tonal characteristics with exterior refinements, it features a well-polished finish that maintains the beauty of the instrument over a lifetime. Silencing system has been added to this U1J. This is an SC2 type SILENT Piano™ .