Shop

Shop

DAS EVENT-210A Active Speaker

150,000 EGP

The EVENT-210A Line is a three-way powered line array in a double 10” “dual-band” configuration which provides a wider frequency range. The DAS loudspeaker units has been teamed up with a single M-75 compression driver and purpose-designed injected aluminum high frequency waveguide.

 

The EVENT-210A line array is powered by a three channel Class D amplifier which provides 360 Wpeak per channel. The amp´s rear panel includes quality Neutrik® XLR and powerCON connectors, status LEDS to facilitate setup and DAS’s Easy-DSP™ interface which simplifies preset selection for the number of units and throw depth.

DAS EVENT-212A Active Speaker

220,000 EGP
The DAS EVENT-212A is a powered, 3-way line array which employs two DAS 12″ loudspeakers in a dual band configuration where each speaker operates in a specific frequency range. At low frequencies, the speakers work in tandem for maximum power, each driven by a dedicated amplifier channel providing 1000 Wpeak output power. The DAS loudspeaker units have been teamed up with a single M-75 compression driver and purpose-designed injected aluminum high frequency waveguide to provide unmatched performance, sensitivity and coverage in both the 90º and 120º formats offered. 

 

The EVENT-212A line array incorporates the DAScontrol™ interface which offers a quick and hassle-free set-up of the systems in arrays and easy alignment with the EVENT-218A and EVENT-121A subwoofer systems. Presets for the number of units of the array, HF compensation for throw distances, and correction for the splay angle of the array can be selected by way of DAScontrol™ and the LCD screen on the located on the back of the cabinet. The powerful digital signal processing of the EVENT-212A includes Finite Impulse Response (FIR) filters providing linear phase response and precise impulse response which in terms of performance, results in added clarity, defined attack in percussion and overall, a more natural sound.

DAS EVENT-218A Active Subwoofers

205,000 EGP

The EVENT-218A dual 18” powered subwoofer makes use of one of DAS´s most acclaimed loudspeakers, the LX series long excursion transducers which were introduced in the high-level LX-218. The enclosure is designed for horizontal use, built using quality Birch plywood, finished with the ISO-flex coating and has a pole mount socket on the upper panel.
The power amplifier provides 3600 Wpeak power and offers features found on the more expensive LX subwoofers such as the Cardioid Preset mode switch which offers specific signal treatment for easy set-up of pairs of systems in cardioid subwoofer applications. The system includes two balanced inputs (A-B) with stereo HPF (100 Hz) filtered output connections for satellite systems. Defeating the HPF filter offers stereo “loop thru” connections. The variable LPF crossover ranges from 80 Hz-125 Hz. A gain control and polarity reverse feature increase user control over the system.

DAS INTEGRAL-M26X Signal Processor

48,500 EGP

The INTEGRAL-M26X, a 1U rack-mount digital signal processor, features two analogue input channels and six analogue output channels equipped with balanced XLR connectors. Its compact, cost-effective design makes it a versatile choice for live and installed PA systems.

 

Remote control and monitoring are possible via ALMA™ software using IP technology, or alternatively, it can be managed using external controllers through OSC messages. Direct unit control is facilitated through a 1.54″ OLED display with control buttons for basic parameters. These include input and output levels, preset recalls, mute, source selection, and link manager functions.

 

The device houses a complete signal processing matrix, offering gain, delay, routing, equalization, and limiters adjustment options. Its internal memory can store over 100 global presets and 200+ output channel presets, including specific presets for all DAS Audio speakers.

 

External control is further simplified through a General-Purpose Input / Output (GPIO) connector, providing an external 3V3 volt, GND signal, and 8 configurable pins via ALMA™software.

DAS MATRIX-22 Signal Processor

26,850 EGP
Audio
Audio Input Connector Audio In: 2 x Female XLR
Audio Output Connector Audio Out: 2 x Male XLR
Network (ALMA)
Input etherCON
Output etherCON
Audio & ALMA Network
Audio and Data Distribution 2 x etherCON Out
LEDS and Indicators
Power ON – Green
Network Connectors Left LED only – Green 100Mbit
Right LED – Green 1Gbit
Data Connectors Left LED – Link Green
Right LED – Activity Orange
Power
AC Input Connector PowerCON TRUE1
Power Supply Universal Mains Switch Mode
Operating Range 90-250 VAC
Current Draw 230 V / 115 V 30 W
Dimensions-Weight
Dimensions ( H x W x D ) 44 x 216 x 302 mm
1,7 x 8,5 x 11,8 in
Net Weight 2,0 kg ( 4,4 lb )
Shipping
Carton Dimensions ( H x W x D ) 110 x 330 x 360 mm
4,3 x 13,0 x 14,2 in
Shipping Weight 3,4 kg ( 7,5 lb )
Package Includes Audio and Network Data Distributor, Rack Mount Angle Brackets (2 units), Linking Plates (2 units), PowerCord.

DAS SARA-SUB Active Subwoofer

290,000 EGP

SARA-SUB is a high-fidelity subwoofer that offers an accurate and powerful bass response thanks to its cardioid design. The system incorporates a DAS 18UXN neodymium loudspeaker with a 4″ voice coil for excellent low-frequency reproduction. In addition, a rear 15FWN neodymium 3″ voice coil speaker creates the necessary cardioid dispersion pattern to compensate for unwanted energy in the rear.

The SARA-SUB’s built-in class D amplifier has 4 channels in bridge mode for each of the speakers. The switch-mode power supply has a correction factor, allowing for greater efficiency and reliability under all operating conditions. The built-in DSP optimizes the signal parameters for the loudspeakers and allows for 14 dB of rear power compensation in the 40 Hz – 80 Hz range.

The enclosure design meets the strict DAS standards for the use of high-quality materials, such as birch plywood and ISO-flex™ exterior protection. In addition, the rigging system allows the SARA to be flown underneath the SARA-SUB, using the JP-SARA. The metal grids incorporate acoustically transparent, moisture-repellent fabric. Recessed handles on the sides of the enclosure facilitate transport and handling.

The packaging of this model includes 1 unit of the product, 1 EC-09 cable, 1 PLINK1-09 cable, and 3 pins.