Shop

Showing 805–816 of 1550 results

KRK ROKIT 7 G4

27,700.00 EGP

The new 7″ KRK ROKIT RP7 G4 (Generation 4) bi-amp professional monitor takes music and sound creativity to a whole new industry-level.

KRK ROKIT 8 G4 8 inch Powered Studio Monitor

0.00 EGP

The new 8″ KRK ROKIT RP8 G4 (Generation 4) bi-amp professional monitor takes music and sound creativity to a whole new industry-level.

KS-40A KURZWEIL STUDIO SPEAKESRS

5,000.00 EGP

SPECS

All specifications subject to change without notice.

Cabinet: 100% wood cabinet using 12mm non-resonant MDF
HF Driver: 3/4 inch (19mm) dome type, magnetically shielded
LF Driver: 4 inch (106mm) diameter, magnetically shielded
Bass Reflex Port: rear panel
Power Output: 10Wrms x2 (at 1KHz, 10% THD)
Frequency Response: 100-10,000Hz (at -5dB)
Controls: 1x Volume, 1x Sub Bass
Input Ports: 2 pairs of stereo RCA jacks, internally mixed

(Line A inputs feature treble boost of 9dB at 10KHz; Line B inputs are flat)

Input Impedance: 20K Ohms
Height: (9-1/16″) (23.00 cm)
Width: (5-7/8″) (14.80 cm)
Depth: (7-1/16″) (18.00 cm)
Weight: (11.00 lb.) (5 kg), both cabinets

KS-50A KURZWEIL

15,700.00 EGP

SPECS

All specifications subject to change without notice.

System Type: Active 2-way
HF Driver: 1” silk dome tweeter
LF Driver: 5” kevlar curved cone (magnetically shielded)
Bass Reflex Port: rear panel
Output Power: 60W (HF 30W, LF 30W), 85W AC consumption power
Frequency Response: 50 Hz – 20kHz
Input Impedance: 23.3 kOhm balanced, 13.3 kOhm unbalanced
Crossover Point: 2.5kHz
SPL: 88dB+/- 3dB
Rated Noise Power: 30 Watt (THD=1%, 4ohm@1kHz)
Input Sensitivity: 75mV@1watt, 415mV@30Watt
Input Connectors: XLR / TS 1/4” combo connector, balanced / unbalanced input
Volume Control: rear panel
Indicator: blue power LED on front panel
Dimensions: 9.8″ (H) x 6.9″ (W) 7.9″ (D)

250mm (H)x 176mm(W) x 200mm (D)

Weight: 9.9 lb / 4.5kg
Working Voltage: AC100-240V 50/60HZ, with 115V / 230V AC selection switch

Kurzweil Audio Interface Unite-2

6,000.00 EGP

OVERVIEW

Two Input, Two Output USB 2.0 Audio Interface.

Get In

Two combo microphone/line inputs (with +48V phantom power support) and 1 switchable Hi-Z instrument input.

Get Out

Individual L/R outputs via balanced 1/4″ TRS connectors. Front panel headphone output with stereo 1/4″ connector.

Make the Conversion

24-bit / 96kHz AD/DA converters.

USB

Bus-powered, full speed USB 2.0. No external power connection required.

Controls

Intuitive and convenient front panel controls for channel input gain (with peak indicators), monitor, phantom power on/off, headphone and master volume.

Compatibility

Cross-platform compatibility for Windows (7, 8.1, 10 with ASIO 2.0, MMe, WDM and DirectSound), Mac OSX* (10.7 and above via the native CoreAudio USB Audio driver)
(*no driver install required)

Bitwig Studio-8 Included!

Bitwig Studio 8-Track is the sketch pad for your musical ideas.

All specifications subject to change without notice.

Kurzweil HDP1 studio Headphones

3,700.00 EGP

SPECS

Transducer: 50mm Dynamic, Closed cavity
Ear Coupling: Supra-aural
Frequency Response: 10-30,000 Hz
Impedance: 32Ω
Sensitivity: 98dB (+/-3dB @1mW)
Rated Power: 300mW
Max Power: 1800 mW
Plug Type: 3.5mm with 6.3mm (1/4″) adaptor included
Cable Type: Straight and coiled options

All specifications subject to change without notice.